{"title":"OME Upper Control Arms","description":"","products":[{"product_id":"arb-old-man-emu-upper-control-arms-uca0005-for-toyota-tacoma-2005-2023","title":"ARB Old Man Emu Upper Control Arms UCA0005 for Toyota Tacoma (2005-2023)","description":"\u003cp\u003e\u003cstrong\u003e[HIGH CAPACITY]\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForged Ball Joint Housing.\u003c\/li\u003e\n\u003cli\u003eForged Eyelets.\u003c\/li\u003e\n\u003cli\u003eHeavy Duty greasable Ball Joint.\u003c\/li\u003e\n\u003cli\u003eOME Ball joint protective cap.\u003c\/li\u003e\n\u003cli\u003eGIIRO bushings, free pivoting, grease free and maintenance free.\u003c\/li\u003e\n\u003cli\u003eIncreased camber\/caster for 2+ in of lift.\u003c\/li\u003e\n\u003cli\u003eMount provision for OE ABS wires.\u003c\/li\u003e\n\u003cli\u003eARB’s Integrit powder coat finish.\u003c\/li\u003e\n\u003cli\u003eBoxed in pairs with foam inserts.\u003c\/li\u003e\n\u003cli\u003eFitting instructions included.\u003c\/li\u003e\n\u003cli\u003eOME Branded outer sleeve.\u003c\/li\u003e\n\u003cli\u003eTested and passed to meet VSB14 requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eWhen an Independent Front Suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding Old Man Emu upper control arms brings the alignment cams back into an acceptable range for both caster and camber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHEEL ALIGNMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note, after fitment of Old Man Emu Upper Control Arms, a wheel alignment is required. If the vehicle is fitted with aftermarket tires\/wheels, fender clearance should be checked. Additional caster may be required if the tires\/wheels do not clear. Wheel alignment information is included in the fitting instructions.\u003c\/p\u003e\n\u003cp\u003eThe OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H): ‎16.4 x 13.3 x 6.4 inches.\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003ePart number: UCA0005.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eUPC: 9332018075963.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eWeight: 20.00 lb.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eDesigned and manufactured in Australia.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eSuitable for: \u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eTOYOTA TACOMA 2016 - 2023.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eTOYOTA TACOMA V6 2005 - 2015.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":40334166393007,"sku":"UCA0005","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/products\/fa1ca00fa80859b892d2a92b710d5257.jpg?v=1662322867"},{"product_id":"ome-front-upper-control-arms-uca0004-for-toyota-4runner-prado-fj-cruiser-old-man-emu","title":"OME Front Upper Control Arms UCA0004 for Toyota 4Runner\/ Prado\/ FJ Cruiser Old Man Emu","description":"\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli id=\"sema_fab_1\"\u003eForged Ball Joint Housing.\u003c\/li\u003e\n\u003cli id=\"sema_fab_2\"\u003eOME-Branded Outer Sleeve.\u003c\/li\u003e\n\u003cli id=\"sema_fab_3\"\u003eEngineered For Use With OME GVM Upgrades.\u003c\/li\u003e\n\u003cli id=\"sema_fab_4\"\u003eTested and Passed to Meet VSB14 Requirements.\u003c\/li\u003e\n\u003cli id=\"sema_fab_5\"\u003eForged Eyelets.\u003c\/li\u003e\n\u003cli id=\"sema_fab_6\"\u003eHeavy Duty Greaseable Ball Joint w\/OME Ball Joint Protective Cap.\u003c\/li\u003e\n\u003cli id=\"sema_fab_7\"\u003eGIIRO Bushings, Free-Pivoting, Grease-Free and Maintenance-Free.\u003c\/li\u003e\n\u003cli id=\"sema_fab_8\"\u003eIncreased Camber and Caster for 50mm Lift.\u003c\/li\u003e\n\u003cli id=\"sema_fab_9\"\u003eMount Provision for OE ABS Wires.\u003c\/li\u003e\n\u003cli id=\"sema_fab_10\"\u003eARB's Intergrit Powder-Coat Finish.\u003c\/li\u003e\n\u003cli id=\"sema_fab_11\"\u003eBoxed in Pairs with Foam Inserts.\u003c\/li\u003e\n\u003cli id=\"sema_fab_12\"\u003eFitting Instructions Included.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eWhen an Independent Front Suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding Old Man Emu upper control arms brings the alignment cams back into an acceptable range for both caster and camber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHEEL ALIGNMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note, after fitment of Old Man Emu Upper Control Arms, a wheel alignment is required. If the vehicle is fitted with aftermarket tires\/wheels, fender clearance should be checked. Additional caster may be required if the tires\/wheels do not clear. Wheel alignment information is included in the fitting instructions.\u003c\/p\u003e\n\u003cp\u003eThe OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H): ‎17.00 x 14.00 x 7.00 inches.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Australia.\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart number: UCA0004.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUPC: 9332018075956.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWeight: 13.00 lb. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSuitable for:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Prado 150 Series 2009-ON.\u003c\/li\u003e\n\u003cli\u003eToyota FJ Cruiser 2007-2014.\u003c\/li\u003e\n\u003cli\u003eToyota 4Runner 2005-ON.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":40398144241839,"sku":"UCA0004","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/products\/64897dbf2f398e13ebe672aa41631155.jpg?v=1662322775"},{"product_id":"arb-old-man-emu-adjustable-front-upper-control-arms-ucajkfr-for-jeep-wrangler-jk-4-door","title":"ARB Old Man Emu Adjustable Front Upper Control Arms UCAJKFR for Jeep Wrangler JK (4-Door)","description":"\u003cp\u003e\u003cstrong\u003e[HIGH CAPACITY]\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets-\"\u003e1.25″ x 0.188″ wall (31.7mm x 4.7mm)1020 DOM steel tube.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003eStamped steel clevis.\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003eAdjustable with jam nut.\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003ePrecision robotic welding.\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003eMax C – Dual Duro Bushing.\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003eForged Rod End.\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003eSold as a pair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eAdjustable control arms will benefit owners who want to customize caster and pinion angles to fine-tune ride and handling for both on and off-road applications. Lower control arms have been designed for maximum ground clearance and with strength and durability in mind; with a 2-inch x 0.188-inch wall (50.8mm x 4.7mm) DOM steel tube, forged eyelet, and rod end. Upper control arms feature a 1.25-inch x 0.188-inch wall (31.7mm x 4.7mm) DOM steel tube and forged rod end or eyelet. All arms have been shot-peened, zinc electroplated and powder coated to ensure maximum corrosion resistance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H): ‎2.00 x 8.00 x 25.00 inches.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Australia.\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003ePart number: UCAJKFR.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eUPC: 9332018040114.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eWeight: 11lb.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSuitable for:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan\u003eJeep Wrangler JK Unlimited 4-Door 2007 -2018.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eJeep Wrangler JK 4-Door 2007 -2018.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":42090003529968,"sku":"UCAJKFR","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/products\/b90f5e6297c334ea33da283407df6f7d.jpg?v=1662318008"},{"product_id":"arb-adjustable-rear-upper-control-arms-ucajkrr-for-jeep-wrangler-jl-and-jk-old-man-emu","title":"ARB Adjustable Rear Upper Control Arms UCAJKRR for Jeep Wrangler JL and JK Old Man Emu","description":"\u003cp\u003e\u003cstrong\u003e[HIGH CAPACITY]\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 0.188 inches. wall (50.8mm x 4.7mm).\u003c\/li\u003e\n\u003cli\u003e1020 DOM STEEL TUBE.\u003c\/li\u003e\n\u003cli\u003eAdjustable w\/ Jam Nut.\u003c\/li\u003e\n\u003cli\u003ePrecision robotic welding.\u003c\/li\u003e\n\u003cli\u003eMax C - Dual Duro Bushing.\u003c\/li\u003e\n\u003cli\u003eForged Eyelet and Forged Rod End.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eAdjustable control arms will benefit owners who want to customize caster and pinion angles to fine-tune ride and handling for both on and off-road applications. Lower control arms have been designed for maximum ground clearance and with strength and durability in mind; with a 2-inch x 0.188-inch wall (50.8mm x 4.7mm) DOM steel tube, forged eyelet, and rod end. Upper control arms feature a 1.25-inch x 0.188-inch wall (31.7mm x 4.7mm) DOM steel tube and forged rod end or eyelet. All arms have been shot-peened, zinc electroplated and powder coated to ensure maximum corrosion resistance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H): ‎2.00 x 8.00 x 25.00 inches.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Australia.\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003ePart number: UCAJKRR.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eUPC: 9332018040121.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eWeight: 15 lbs.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eFitment not mandatory, however fitment will allow for fine tuning vehicle geometry.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSuitable for:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler Unlimited 4-Door (JK) 2007-2018.\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler JL 2018 - 2022 (4 Door).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":42090006511856,"sku":"UCAJKRR","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/products\/2599ca7f35f01cf6dddebde5d8c00d69.jpg?v=1662319648"},{"product_id":"ome-adjustable-front-upper-control-arms-ucajlfr-for-jeep-wrangler-jl-lwb-2018-2022-old-man-emu","title":"OME Adjustable Front Upper Control Arms UCAJLFR for Jeep Wrangler JL LWB 2018 - 2022 Old Man Emu","description":"\u003cp\u003e\u003cstrong\u003e[HIGH CAPACITY]\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets-\"\u003e1.25″ x 0.188″ wall (31.7mm x 4.7mm)1020 DOM steel tube.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003eStamped steel clevis.\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003eAdjustable with jam nut.\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003ePrecision robotic welding.\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003eMax C – Dual Duro Bushing.\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003eForged Rod End.\u003c\/li\u003e\n\u003cli class=\"bullets-\"\u003eSold as a pair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eAdjustable control arms will benefit owners who want to customize caster and pinion angles to fine-tune ride and handling for both on and off-road applications. Lower control arms have been designed for maximum ground clearance and with strength and durability in mind; with a 2-inch x 0.188-inch wall (50.8mm x 4.7mm) DOM steel tube, forged eyelet, and rod end. Upper control arms feature a 1.25-inch x 0.188-inch wall (31.7mm x 4.7mm) DOM steel tube and forged rod end or eyelet. All arms have been shot-peened, zinc electroplated and powder coated to ensure maximum corrosion resistance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H): ‎3.00 x 7.00 x 24.00 inches.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Australia.\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003ePart number: UCAJLFR.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eUPC: 9332018040114.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eWeight: 14lb.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSuitable for:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan\u003eJeep Wrangler JL SWB 2018 - 2022.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eJeep Wrangler JL LWB 2018 - 2022.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":42135260758256,"sku":"UCAJLFR","price":290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/products\/e9d4d1838b87fdbab173bc49fe58656e.jpg?v=1662316958"},{"product_id":"ome-front-upper-control-arms-for-toyota-hilux-2005-2022-uca0003-old-man-emu","title":"OME Front Upper Control Arms for Toyota Hilux (2005-2022) UCA0003 Old Man Emu","description":"\u003cp\u003e\u003cstrong\u003e[HIGH CAPACITY]\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForged Ball Joint Housing.\u003c\/li\u003e\n\u003cli\u003eForged Eyelets.\u003c\/li\u003e\n\u003cli\u003eHeavy Duty greasable Ball Joint.\u003c\/li\u003e\n\u003cli\u003eOME Ball joint protective cap.\u003c\/li\u003e\n\u003cli\u003eGIIRO bushings, free pivoting, grease free and maintenance free.\u003c\/li\u003e\n\u003cli\u003eIncreased camber\/caster for 2in lift.\u003c\/li\u003e\n\u003cli\u003eMount provision for OE ABS wires.\u003c\/li\u003e\n\u003cli\u003eARB’s Integrit powder coat finish.\u003c\/li\u003e\n\u003cli\u003eBoxed in pairs with foam inserts.\u003c\/li\u003e\n\u003cli\u003eFitting instructions included.\u003c\/li\u003e\n\u003cli\u003eOME Branded outer sleeve.\u003c\/li\u003e\n\u003cli\u003eTested and passed to meet VSB14 requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eWhen an Independent Front Suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding Old Man Emu upper control arms brings the alignment cams back into an acceptable range for both caster and camber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHEEL ALIGNMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note, after fitment of Old Man Emu Upper Control Arms, a wheel alignment is required. If the vehicle is fitted with aftermarket tires\/wheels, fender clearance should be checked. Additional caster may be required if the tires\/wheels do not clear. Wheel alignment information is included in the fitting instructions.\u003c\/p\u003e\n\u003cp\u003eThe OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H): ‎16.4 x 13.3 x 6.4 inches.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Australia.\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003ePart number: UCA0003.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eUPC: \u003cspan data-mce-fragment=\"1\"\u003e9332018075949\u003c\/span\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eWeight: 21.2299 lb. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSuitable for:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Hilux 2005-2022 (Diesel Engines \u0026amp; Petrol Engines).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":42207378800880,"sku":"UCA0003","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/products\/a6c1be59b7ca2a6d60abfbe90876326d_a282ec7f-bf23-456b-aac0-e419603eaff9.jpg?v=1662319535"},{"product_id":"arb-old-man-emu-front-upper-control-arms-uca0001-for-toyota-landcruiser-200-series","title":"ARB Old Man Emu Front Upper Control Arms UCA0001 for Toyota LandCruiser 200 Series","description":"\u003cp\u003e\u003cstrong\u003e[HIGH CAPACITY]\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForged Ball Joint Housing.\u003c\/li\u003e\n\u003cli\u003eForged Eyelets.\u003c\/li\u003e\n\u003cli\u003eHeavy Duty greasable Ball Joint.\u003c\/li\u003e\n\u003cli\u003eOME Ball joint protective cap.\u003c\/li\u003e\n\u003cli\u003eGIIRO bushings, free pivoting, grease free and maintenance free.\u003c\/li\u003e\n\u003cli\u003eIncreased camber\/caster for 2in lift.\u003c\/li\u003e\n\u003cli\u003eMount provision for OE ABS wires.\u003c\/li\u003e\n\u003cli\u003eARB’s Integrit powder coat finish.\u003c\/li\u003e\n\u003cli\u003eBoxed in pairs with foam inserts.\u003c\/li\u003e\n\u003cli\u003eFitting instructions included.\u003c\/li\u003e\n\u003cli\u003eOME Branded outer sleeve.\u003c\/li\u003e\n\u003cli\u003eTested and passed to meet VSB14 requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eWhen an Independent Front Suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding Old Man Emu upper control arms brings the alignment cams back into an acceptable range for both caster and camber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHEEL ALIGNMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note, after fitment of Old Man Emu Upper Control Arms, a wheel alignment is required. If the vehicle is fitted with aftermarket tires\/wheels, fender clearance should be checked. Additional caster may be required if the tires\/wheels do not clear. Wheel alignment information is included in the fitting instructions.\u003c\/p\u003e\n\u003cp\u003eThe OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H): ‎17 x 14 x 7 inches.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Australia.\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003ePart number: UCA0001.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eUPC: \u003cspan data-mce-fragment=\"1\"\u003e9332018075925.\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSuitable for: \u003cem data-mce-fragment=\"1\"\u003eToyota LandCruiser 200 Series.\u003c\/em\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":42346872635632,"sku":"UCA0001","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/products\/a6c1be59b7ca2a6d60abfbe90876326d.jpg?v=1662318503"},{"product_id":"ome-adjustable-upper-trailing-arms-rear-uta3036","title":"OME Adjustable Upper Trailing Arms Rear UTA3036","description":"\u003cp\u003eOld Man Emu has now extended its range of geometry alignment components. Recommended for raised vehicles to reset axle location and geometry realignment, Old Man Emu's heavy-duty adjustable Panhard rods and trailing arms feature high strength 4140 alloy steel finished with a hard-wearing black powder coat for optimum corrosion protection. Old Man Emu's products also boast premium bushing technology for improved performance and extended life.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS.\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H): 3.00 X 7.00 X 22.00 inches.\u003c\/li\u003e\n\u003cli\u003ePart number: UTA3036\u003c\/li\u003e\n\u003cli\u003eUPC: 99332018019172\u003c\/li\u003e\n\u003cli\u003eFinish: Powder Coated Black.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: 4140 Alloy Steel.\u003c\/li\u003e\n\u003cli\u003eWeight: 12 Lbs.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Australia.\u003c\/li\u003e\n\u003cli\u003eSuitable for: TOYOTA LANDCRUISER 80 \u0026amp; 105 SERIES.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":42392754520304,"sku":"UTA3036","price":489.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/products\/24e119f368fcbdaeae14ed9056228550.jpg?v=1662317392"},{"product_id":"arb-old-man-emu-upper-control-arms-uca0002-for-ford-ranger-px-px2-px3","title":"ARB Old Man Emu Upper Control Arms UCA0002 for Ford Ranger PX, PX2, PX3","description":"\u003cp\u003e\u003cstrong\u003e[HIGH CAPACITY]\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForged Ball Joint Housing.\u003c\/li\u003e\n\u003cli\u003eForged Eyelets.\u003c\/li\u003e\n\u003cli\u003eHeavy Duty greasable Ball Joint.\u003c\/li\u003e\n\u003cli\u003eOME Ball joint protective cap.\u003c\/li\u003e\n\u003cli\u003eGIIRO bushings, free pivoting, grease free and maintenance free.\u003c\/li\u003e\n\u003cli\u003eIncreased camber\/caster for 2in lift.\u003c\/li\u003e\n\u003cli\u003eMount provision for OE ABS wires.\u003c\/li\u003e\n\u003cli\u003eARB’s Integrit powder coat finish.\u003c\/li\u003e\n\u003cli\u003eBoxed in pairs with foam inserts.\u003c\/li\u003e\n\u003cli\u003eFitting instructions included.\u003c\/li\u003e\n\u003cli\u003eOME Branded outer sleeve.\u003c\/li\u003e\n\u003cli\u003eTested and passed to meet VSB14 requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eWhen an Independent Front Suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding Old Man Emu upper control arms brings the alignment cams back into an acceptable range for both caster and camber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHEEL ALIGNMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note, after fitment of Old Man Emu Upper Control Arms, a wheel alignment is required. If the vehicle is fitted with aftermarket tires\/wheels, fender clearance should be checked. Additional caster may be required if the tires\/wheels do not clear. Wheel alignment information is included in the fitting instructions.\u003c\/p\u003e\n\u003cp\u003eThe OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003ePart number: UCA0002.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eUPC: \u003cspan data-mce-fragment=\"1\"\u003e9332018075932\u003c\/span\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eDesigned and manufactured in Australia.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eSuitable for: \u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" mce-data-marked=\"1\" data-mce-style=\"font-weight: 400;\"\u003eFord Ranger PX, PX, PX3 (2011-ON).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":44074367090928,"sku":"UCA0002","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/UCA0002.jpg?v=1683687606"},{"product_id":"arb-old-man-emu-front-upper-control-arms-uca0010-for-toyota-landcruiser-100-series-lexus-lx470-98-07","title":"ARB Old Man Emu Front Upper Control Arms UCA0010 for Toyota LandCruiser 100 Series, Lexus LX470 (98-07)","description":"\u003cp\u003e\u003cstrong\u003e[HIGH CAPACITY]\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases caster by +2.5-3.5 degrees.\u003c\/li\u003e\n\u003cli\u003eAdds up to 1.5 deg negative camber.\u003c\/li\u003e\n\u003cli\u003eForged Ball Joint Housing.\u003c\/li\u003e\n\u003cli\u003eForged Eyelets.\u003c\/li\u003e\n\u003cli\u003eHeavy Duty greasable Ball Joint.\u003c\/li\u003e\n\u003cli\u003eOME Ball joint protective cap.\u003c\/li\u003e\n\u003cli\u003eGIIRO bushings, free pivoting, grease free and maintenance free.\u003c\/li\u003e\n\u003cli\u003eMount provision for OE ABS wires.\u003c\/li\u003e\n\u003cli\u003eARB’s Intergrit powder coat finish.\u003c\/li\u003e\n\u003cli\u003eBoxed in pairs with foam inserts.\u003c\/li\u003e\n\u003cli\u003eFitting instructions included.\u003c\/li\u003e\n\u003cli\u003eOME Branded outer sleeve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eWhen an Independent Front Suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding Old Man Emu upper control arms brings the alignment cams back into an acceptable range for both caster and camber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHEEL ALIGNMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note, after fitment of Old Man Emu Upper Control Arms, a wheel alignment is required. If the vehicle is fitted with aftermarket tires\/wheels, fender clearance should be checked. Additional caster may be required if the tires\/wheels do not clear. Wheel alignment information is included in the fitting instructions.\u003c\/p\u003e\n\u003cp\u003eThe OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H): ‎17 x 14 x 7 inches.\u003c\/li\u003e\n\u003cli\u003eWeight: 21.60 lbs.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Australia.\u003c\/li\u003e\n\u003cli\u003ePart number: UCA0010.\u003c\/li\u003e\n\u003cli\u003eUPC: 9332018100795.\u003c\/li\u003e\n\u003cli\u003eSuitable for:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eToyota LandCruiser 100 Series (1998-2007).\u003c\/li\u003e\n\u003cli\u003eLexus LX470 (1998-2007).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":44209071227120,"sku":"UCA0010","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/UCA0010.jpg?v=1692213540"},{"product_id":"arb-old-man-emu-upper-control-arms-uca0007-for-isuzu-d-max-mazda-bt50","title":"ARB Old Man Emu Upper Control Arms UCA0007 for Isuzu D-Max, Mazda BT50","description":"\u003cp\u003e\u003cstrong\u003e[HIGH CAPACITY]\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForged Ball Joint Housing.\u003c\/li\u003e\n\u003cli\u003eForged Eyelets.\u003c\/li\u003e\n\u003cli\u003eHeavy Duty greasable Ball Joint.\u003c\/li\u003e\n\u003cli\u003eOME Ball joint protective cap.\u003c\/li\u003e\n\u003cli\u003eGIIRO bushings, free pivoting, grease free and maintenance free.\u003c\/li\u003e\n\u003cli\u003eIncreased camber\/caster for 2in lift.\u003c\/li\u003e\n\u003cli\u003eMount provision for OE ABS wires.\u003c\/li\u003e\n\u003cli\u003eARB’s Integrit powder coat finish.\u003c\/li\u003e\n\u003cli\u003eBoxed in pairs with foam inserts.\u003c\/li\u003e\n\u003cli\u003eFitting instructions included.\u003c\/li\u003e\n\u003cli\u003eOME Branded outer sleeve.\u003c\/li\u003e\n\u003cli\u003eTested and passed to meet VSB14 requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eWhen an Independent Front Suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding Old Man Emu upper control arms brings the alignment cams back into an acceptable range for both caster and camber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHEEL ALIGNMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note, after fitment of Old Man Emu Upper Control Arms, a wheel alignment is required. If the vehicle is fitted with aftermarket tires\/wheels, fender clearance should be checked. Additional caster may be required if the tires\/wheels do not clear. Wheel alignment information is included in the fitting instructions.\u003c\/p\u003e\n\u003cp\u003eThe OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart number: UCA0007.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned and manufactured in Australia.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSuitable for: \u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIsuzu D-Max 2021-ON.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMazda BT50.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":44982095347952,"sku":"UCA0007","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/UCA0002_0add23a5-63ae-4dcb-b9a1-106742f8ad32.jpg?v=1705888838"},{"product_id":"arb-old-man-emu-upper-control-arms-uca0011-for-ford-bronco-21-23","title":"ARB Old Man Emu Upper Control Arms UCA0011 for Ford Bronco (21-23)","description":"\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli id=\"sema_fab_1\"\u003eTubular design with forged eyelet and ball joint housings.\u003c\/li\u003e\n\u003cli id=\"sema_fab_2\"\u003eHeavy-duty greaseable ball joint with protective cap.\u003c\/li\u003e\n\u003cli id=\"sema_fab_3\"\u003eFree pivoting, grease and maintenance-free GIIRO bushing.\u003c\/li\u003e\n\u003cli id=\"sema_fab_4\"\u003eIncreased Camber and Caster for 2” (50mm) lift.\u003c\/li\u003e\n\u003cli id=\"sema_fab_5\"\u003eMount provisions for OE ABS lines.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eUpper control arms can be found on independent front suspension (IFS) vehicles, acting as the middleman between the vehicle frame and knuckle spindle. Front upper control arms are designed to keep the front wheels aligned, limit articulation, and ensure optimum handling on and off-road. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOld Man Emu Upper Control Arms bring the alignment cams back into an acceptable range ; +2.5 and +3.5 degrees of caster and 1.5 negative degrees camber based on a 2 inch lift. A wheel alignment is required after installation and fender clearance should be checked when the vehicle is fitted with aftermarket tires and wheels\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003ePart number: UCA0011.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eUPC: \u003cspan\u003e9332018100801\u003c\/span\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eDesigned and manufactured in Australia.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eSuitable for: \u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\" mce-data-marked=\"1\"\u003eFord Bronco Base, Badlands, Big Bend, Black Diamond, Outer Banks, \u003cspan\u003eWildtrak\u003c\/span\u003e (2021-2023).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":46647254876400,"sku":"UCA0011","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/UCA0011.jpg?v=1728055943"},{"product_id":"old-man-emu-adjustable-upper-trailing-arms-utaa106","title":"Old Man Emu Adjustable Upper Trailing Arms UTAA106","description":"\u003ch4\u003eFEATURES\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e Premium bushing technology for improved performance and extended life\u003c\/li\u003e\n\u003cli\u003e Development - To ensure we meet your expectations ARB invests heavily in research and development. Our design and engineering team utilizes the latest CAD CAM parametric modeling systems and finite element analysis packages and is supported by subcontract companies and universities for special projects like vibration strength and crash testing. With an air bag equipped vehicle for example it is essential that the vehicle's crush rate and air bag triggering is not altered when a bull bar is installed. Our exhaustive testing programs ensure ARB bull bars meet these requirements. We also devote considerable time and resources toward to sourcing new products from around the world. IPF lights from Japan Warn winches from the US' we scan the globe in search of equipment that meets both the demands of our customers and our own stringent quality requirements. What's more we're also constantly on the lookout for new ways to improve our business practices from distribution to customer service. ARB is a Quality Endorsed Company and wherever we can we endeavor to 'raise the bar'.\u003c\/li\u003e\n\u003cli\u003e High-strength 4140 alloy steel\u003c\/li\u003e\n\u003cli\u003e Hard-wearing black powdercoat finish protects against corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\u003cp\u003e Upper Trailing Arms from ARB are recommended for raised vehicles to reset axle location and geometry realignment. Old Man Emu's heavy-duty adjustable upper trailing arms feature high-strength 4140 alloy steel finished with a hard wearing black powder coat for optimum corrosion protection. Old Man Emu's products also boast premium bushing technology for improved performance and extended life.\u003c\/p\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":46722510881008,"sku":"UTAA106","price":484.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/UTAA106_v1.jpg?v=1729801105"},{"product_id":"arb-old-man-emu-upper-control-arms-uca0017-for-ford-f-150-21-24","title":"ARB Old Man Emu Upper Control Arms UCA0017 for Ford F-150 (21-24)","description":"\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli id=\"sema_fab_1\"\u003eTubular design with forged eyelet and ball joint housings.\u003c\/li\u003e\n\u003cli id=\"sema_fab_2\"\u003eHeavy-duty greaseable ball joint with protective cap.\u003c\/li\u003e\n\u003cli id=\"sema_fab_3\"\u003eFree pivoting, grease and maintenance-free GIIRO bushing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli id=\"sema_fab_5\"\u003eMount provisions for OE ABS lines.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eUpper control arms can be found on independent front suspension (IFS) vehicles, acting as the middleman between the vehicle frame and knuckle spindle. Front upper control arms are designed to keep the front wheels aligned, limit articulation, and ensure optimum handling on and off-road. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOld Man Emu Upper Control Arms bring the alignment cams back into an acceptable range ; +2.5 and +3.5 degrees of caster and 1.5 negative degrees camber based on a 2 inch lift. A wheel alignment is required after installation and fender clearance should be checked when the vehicle is fitted with aftermarket tires and wheels\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart number: UCA0017.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned and manufactured in Australia.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSuitable for: \u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFord F-150 (2021-2024)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":46990152073456,"sku":"UCA0017","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/UCA0011.jpg?v=1728055943"},{"product_id":"arb-old-man-emu-upper-control-arms-uca0016-for-toyota-tundra-22-on","title":"ARB Old Man Emu Upper Control Arms UCA0016 for Toyota Tundra (22-ON)","description":"\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli id=\"sema_fab_1\"\u003eTubular design with forged eyelet and ball joint housings.\u003c\/li\u003e\n\u003cli id=\"sema_fab_2\"\u003eHeavy-duty greaseable ball joint with protective cap.\u003c\/li\u003e\n\u003cli id=\"sema_fab_3\"\u003eFree pivoting, grease and maintenance-free GIIRO bushing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli id=\"sema_fab_5\"\u003eMount provisions for OE ABS lines.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eUpper control arms can be found on independent front suspension (IFS) vehicles, acting as the middleman between the vehicle frame and knuckle spindle. Front upper control arms are designed to keep the front wheels aligned, limit articulation, and ensure optimum handling on and off-road. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOld Man Emu Upper Control Arms bring the alignment cams back into an acceptable range ; +2.5 and +3.5 degrees of caster and 1.5 negative degrees camber based on a 2 inch lift. A wheel alignment is required after installation and fender clearance should be checked when the vehicle is fitted with aftermarket tires and wheels\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart number: UCA0016.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned and manufactured in Australia.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSuitable for: \u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eToyota Tundra (2022-ON)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":47194241859824,"sku":"UCA0016","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/UCA0016.jpg?v=1752624917"},{"product_id":"arb-old-man-emu-upper-control-arms-uca0021-for-toyota-tacoma-23-on-landcruiser-prado-250-landcruiser-300","title":"ARB Old Man Emu Upper Control Arms UCA0021 for Toyota Tacoma (24-ON), LandCruiser Prado 250, LandCruiser 300","description":"\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli id=\"sema_fab_1\"\u003eTubular design with forged eyelet and ball joint housings.\u003c\/li\u003e\n\u003cli id=\"sema_fab_2\"\u003eHeavy-duty greaseable ball joint with protective cap.\u003c\/li\u003e\n\u003cli id=\"sema_fab_3\"\u003eFree pivoting, grease and maintenance-free GIIRO bushing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli id=\"sema_fab_5\"\u003eMount provisions for OE ABS lines.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eUpper control arms can be found on independent front suspension (IFS) vehicles, acting as the middleman between the vehicle frame and knuckle spindle. Front upper control arms are designed to keep the front wheels aligned, limit articulation, and ensure optimum handling on and off-road. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOld Man Emu Upper Control Arms bring the alignment cams back into an acceptable range ; +2.5 and +3.5 degrees of caster and 1.5 negative degrees camber based on a 2 inch lift. A wheel alignment is required after installation and fender clearance should be checked when the vehicle is fitted with aftermarket tires and wheels\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePart number: UCA0021.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDesigned and manufactured in Australia.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSuitable for: \u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eToyota Tacoma (2024-ON).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLandCruiser Prado 250.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLandCruiser 300.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":47534508179696,"sku":"UCA0021","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/uca0021_1.png?v=1746577578"},{"product_id":"old-man-emu-upper-control-arms-uca0037-for-toyota-4runner-25-on","title":"Old Man Emu Upper Control Arms UCA0037 for Toyota 4Runner (25-ON)","description":"\u003ch4\u003eFEATURES\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTubular design with forged eyelet and ball joint housings.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFree pivoting grease and maintenance-free GIIRO bushing.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty greaseable ball joint with protective cap.\u003c\/li\u003e\n\u003cli\u003eVehicle specific design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eUpper control arms can be found on independent front suspension (IFS) vehicles acting as the middleman between the vehicle frame and knuckle spindle. Front upper control arms are designed to keep the front wheels aligned limit articulation and ensure optimum handling on and off-road. Old Man Emu Upper Control Arms bring the alignment cams back into an acceptable range. A wheel alignment is required after installation and fender clearance should be checked when the vehicle is fitted with aftermarket tires and wheels.\u003c\/p\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":48050570428656,"sku":"UCA0037","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/UCA0037_v1.jpg?v=1758144512"},{"product_id":"arb-old-man-emu-upper-control-arms-uca0012-for-nissan-frontier-np300","title":"ARB Old Man Emu Upper Control Arms UCA0012 for Nissan Frontier, NP300","description":"\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli id=\"sema_fab_1\"\u003eTubular design with forged eyelet and ball joint housings.\u003c\/li\u003e\n\u003cli id=\"sema_fab_2\"\u003eHeavy-duty greaseable ball joint with protective cap.\u003c\/li\u003e\n\u003cli id=\"sema_fab_3\"\u003eFree pivoting, grease and maintenance-free GIIRO bushing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli id=\"sema_fab_5\"\u003eMount provisions for OE ABS lines.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eUpper control arms can be found on independent front suspension (IFS) vehicles, acting as the middleman between the vehicle frame and knuckle spindle. Front upper control arms are designed to keep the front wheels aligned, limit articulation, and ensure optimum handling on and off-road. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOld Man Emu Upper Control Arms bring the alignment cams back into an acceptable range ; +2.5 and +3.5 degrees of caster and 1.5 negative degrees camber based on a 2 inch lift. A wheel alignment is required after installation and fender clearance should be checked when the vehicle is fitted with aftermarket tires and wheels\u003c\/span\u003e\u003c\/p\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":48186743128304,"sku":"UCA0012","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/UCA0011.jpg?v=1728055943"},{"product_id":"machito-upper-control-arm-toyota-4runner-25-on","title":"Machito Upper Control Arm Toyota 4Runner (25-ON)","description":"\u003ch4\u003eFEATURES\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTubular design with forged eyelet and ball joint housings.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFree pivoting grease and maintenance-free GIIRO bushing.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty greaseable ball joint with protective cap.\u003c\/li\u003e\n\u003cli\u003eVehicle specific design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003eABOUT THIS PRODUCT\u003c\/h4\u003e\n\u003cp\u003eUpper control arms can be found on independent front suspension (IFS) vehicles acting as the middleman between the vehicle frame and knuckle spindle. Front upper control arms are designed to keep the front wheels aligned limit articulation and ensure optimum handling on and off-road. This upper Control Arms bring the alignment cams back into an acceptable range. A wheel alignment is required after installation and fender clearance should be checked when the vehicle is fitted with aftermarket tires and wheels.\u003c\/p\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":48966787989744,"sku":"MUCA04","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/6944\/8111\/files\/ChatGPTImageMar9_2026_11_28_29PM.png?v=1773113929"}],"url":"https:\/\/mudify.com\/collections\/ome-upper-control-arms.oembed","provider":"Mudify ","version":"1.0","type":"link"}