OME 2.5 inch 4Runner 10-23 Lift Kit (Standard Load) Old Man Emu Suspension OME4R-5GEN Fits 5th Gen Toyota 4Runner


OME 2.5 inch 4Runner 10-23 Lift Kit (Standard Load) Old Man Emu Suspension OME4R-5GEN Fits 5th Gen Toyota 4Runner


  • Enhanced Ride Quality and Control On & Off-Road.
  • Increased load-carrying capacity.
  • Increased Ride Height & Ground Clearance by 2.5 Inches.
  • Can Accommodate Larger Tires (see details below for more info).
  • Includes a 3-Year / 37,200 miles Manufacturer Warranty.
  • Fits Toyota 4Runner 2010-2023 (5th Gen).

    Set Includes (In the Box)



    Front Coil Springs 2885


    Rear Coil Spring 2895


    Front Nitrocharger Sport Strut 90016


    Rear Nitrocharger Sport 60086


    Upper Control Arms UCA0004 / SPC Adjustable Control Arms / Camburg Uniball Upper Control Arms CAM-310036 (Recommended)


    Front Trim Packer Fitting Kit OME95PF5 (Recommended)


    Front Strut Top Hat Kit OMETH002 (Recommended)


    Shock Stone Guard Kit OME661 (Recommended)


    Differential Drop Spacer Kit REV-RTDD6-KB (Recommended)


    Extended Brake Lines (Recommended)


    Note: Some products on the main image are optional.


    Upper control arms


    When an Independent Front Suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding Old Man Emu upper control arms brings the alignment cams back into an acceptable range for both caster and camber.

    The OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based on an approximate 50mm or 2in lift).

    Click here to learn more about UCA


    Trim Packer Fitting Kit


    - To maintain ride height when front accessory weight exceeds 220 lbs.
    - OME95PF5 coil spacer should be installed (not included).

    Click here to learn more


    Top hat kit


    Old Man Emu engineers have developed a complete replacement Top Hat solution that incorporates all required components to fully replace the original Strut Top hat. This includes a new bearing plate, high Duro rubber isolator, rubber bushes, washers, crush tube (if applicable), and mounting nuts.

    All components are to the original equipment specifications and are a straightforward bolt-in solution.

    Click here to learn more


    *Front Shock Assembly

    If you're a DIY-er and haven't installed one of these yet, we've got your back. This option includes 2 brand new top hats that make the installation easy as pie! You won’t need any other parts or tools just plug & play. Note: Add 1-2 shipping days for the installation. Assembled front shocks are non-returnable.


    Rear Shock Stone Guards

    Protect your rear shocks from stone chip damage

    1 package includes a pair of guards to protect both rear shocks.

    Click here to learn more


    The Diff Drop Kit

    The differential drop kit for the Toyota will lower the differential for improved CV joint angles on vehicles lifted between 3 inches to 6 inches. Includes 2 new longer differential bolts, 2 one-inch differential spacers, 1/2 inch skid plate spacers, and longer skid plate bolts.


    - Easy bolt-on installation.
    - Est. Install Time: 2-4hrs.
    - This lift kit fits: Toyota 4runner 5th Generation (2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 & 2023).
    - Recommended Tire Size: 285-70R17 (32.76”), 295-70R17, 285-55R20 (32.60”).
    - Recommended Wheel Backspacing: Factory.
    - Does NOT fit models equipped with X-REAS system.
    - SKU: OME4R-5GEN-2.5STC


    How to identify if your vehicle has the KDSS system?

    1. Check the vehicle's front end on the left side (driver).

    2. Find the stabilizer bar and note the shape of the bracket.

    3. If the vehicle contains this hydraulic support and has (or you're planning on installing) an Old Man Emu suspension, it is necessary to install one (1) Trim Packer (OME95PF5) on the passenger side. If the suspension is BP51, it is necessary to install the correct coilover and fitting kit, which is different from the original truck.


    Questions? Write us at


    This Kit was specifically designed for your car by Australias best engineers. So it is not just a compilation of parts to increase the vehicle’s ride height. It is a tuned, matched, and integrated Suspension system that results in optimum levels of comfort (ON and OFF Road), load-carrying capability, and control characteristics.

    The rear set of nitrogen-charged N3 shocks offer an incredible balance of on and off-road ride quality. With a 100% bolt-on installation process, this kit is easy to install in a home garage with common tools.

    Ome takes part in integrations to the next level with its own selection of bushings, U-bolts, center bolts, spring liners, trim packers, and suspension fitting kits. Old Man Emu employs a team of full-time ride control engineers that carry out exhaustive testing and development on each of their components.

    During development, each new Suspension system is tested not only for practical performance but also to ensure compatibility with modern vehicle safety features such as electronic stability control, an area in which ARB has invested heavily.

    Take your ride to the next level with OME!


    We take pride in offering parts based on our proprietary formula, developed through over 17 years of experience, to achieve the desired lift height. Please note that these parts may not align with Australia's ARB application guide. Click here to learn more.

    Read More
    Read Less

    We pride ourselves with our partnerships and close relationships with our vendors, so in case your product fails after 30 days contact us and we will submit the warranty claim directly with the manufacturer.
    Click here for our Full Warranty Policy


    ll items are eligible for return within 30 days of the delivery date only if items are in its original packaging and in new (unused) condition. Original & return shipping are non-refundable, but don't worry we will provide a discounted shipping label for your return so you do not pay full price ;) We do not like to charge restocking fee BUT if the product or its box is not in perfect condition we can't sell it at full price again so we may charge you 15% restocking fee.
    Click here to see our full return policy

    • - Our prices can't be beat, and we're willing to put our money where our mouth is. If you find a lower price on a product and it's being sold by an authorized online retailer, we'll not only match it — we'll beat it. Conditions Apply, please see our Full Price Match Policy HERE

    • - Chat with one of our specialists and we will process your request live or submit a Price Match Request HERE

    • - Price Matching for Products You Have Already Purchased

    • - Please contact us HERE with our online submission or email us at providing the lower price, the direct link to where you found it, and the date you purchased the item(s) from us. We will look into your order and process your refund. You will receive confirmation of the refund by email within 1-2 business days.

    For Fast Products*
    Shipping takes 2 to 3 days. If the order is placed before 3pm EST your item will ship out the same day, if not it will be shipped out the next day.
    *Fast products have a Fast badge on the main image.

    For Other Products
    Shipping takes about 3 to 5 business days plus 24 to 48 hours of handling time. If you need expedited shipping please reach through the chat to give you a quote and time estimate.
    YES, If you are not completely satisfied with one of our products you may return it any time within 30 days of the date of sale for a hassle-free refund of the amount paid for the product. Refunds do not include shipping costs. We only specify that you have the original packaging, the product not be installed, damaged, missing components or manufacturer's documentation.

    Please see our full return policy Here

    We pride ourselves with our partnerships and close relationships with our vendors, so in case your product fails after 30 days contact us and we will submit the warranty claim directly with the manufacturer.
    Click here for our Full Warranty Policy

    You can also check your order status on-line. Use the My Account button on top of every page or contact us at (786) 798-6597 or through our live chat.

    If you wish to cancel your order please contact us ASAP at (786) 798-6597 or through live chat. We will make our best effort to cancel the order
    We are committed to keeping your personal information private and safe. We use encrypted secure communications in our checkout.

    For additional details, please read our complete Privacy Policy

    Customer Reviews

    Your cart