*Lifts may vary, estimated heights.
- Home
- Drivetrain
- Air Lockers
- ARB RD105 Air Locker Differential Dana 35 with 30 Splines
[DIFFERENTIAL CASE]
- A fully machined one-piece nodular iron differential carrier case offers the rigidity of a one-piece factory differential with twice the standard number of pinion gears to cope with the torque.
[FLANGE CAP ASSEMBLY]
- A fully machined nodular iron flange cap incorporates the stationary side of ARBs tough, proven, and patented timed locking mechanism.
[SPLINE SIDE GEAR]
- High-grade surface treatments, nickel alloy steel, and ARB’s patented timed locking system make this the most "lockable" gear in the industry.
[PINION GEAR]
- Forged gears and redefined tooth geometry, ARB's revolutionary design yields structural advantages of up to 30% over other available high-strength gears.
[TRACTION]
- Provides 100% traction on demand without affecting road drivability or driveline wear. Vastly improved traction means less reliance on momentum, thus reducing the likelihood of vehicle damage and environmental impact.
[RELIABLE]
- Incredibly simple yet effective design that employs minimal moving parts, thereby ensuring maximum reliability. Thoroughly tested and proven design trusted and used in over 80 countries around the world.
ABOUT THIS PRODUCT
Locking differentials have been available for years but were always a compromise, performing well either off the road or on the road - but not on both. The ARB Air Locker provides normal differential action on the street - maintaining safe, predictable handling. An ARB Air Locker differential will drive out of the most difficult situations. Easy-to-follow installation instructions are included in the kit.
Created to provide 100% traction on demand without sacrificing any of your vehicle's highway driving performance, ARB Air Lockers employ a 12 volt ARB Air Compressor designed to activate (and deactivate) a solid and durable locking mechanism inside the differential. This gives you the traction you need, when you need it, all at the flip of a switch and all within the comfort of the driver's seat.
SPECIFICATIONS
- Dimensions (L x W x H): 10.63 x 10.63 x 11.02 inches.
- Part Number: RD105.
- Weight: 22.00 lb.
- Shaft Diameter: 1.31".
- Spline Quantity: 30.
- Spline Type: 24/48 DP.
- Pressure Angle: 30 Degrees.
- Axle Model: Dana 35.
- Axle Position: Rear.
- Designed and manufactured in Australia.
- Fitment:
- 1990 - 2001 Jeep Cherokee (XJ).
- 1997 - 2006 Jeep Wrangler (TJ).
- 1990 - 1995 Jeep Wrangler (YJ).
Warranty
We pride ourselves with our partnerships and close relationships with our vendors, so in case your product fails after 30 days contact us and we will submit the warranty claim directly with the manufacturer.
Click here for our Full Warranty Policy
Returns
ll items are eligible for return within 30 days of the delivery date only if items are in its original packaging and in new (unused) condition.
Original & return shipping are non-refundable, but don't worry we will provide a discounted shipping label for your return so you do not pay full price ;)
We do not like to charge restocking fee BUT if the product or its box is not in perfect condition we can't sell it at full price again so we may charge you 15% restocking fee.
Click here to see our full return policy
-
- Our prices can't be beat, and we're willing to put our money where our mouth is. If you find a lower price on a product and it's being sold by an authorized online retailer, we'll not only match it — we'll beat it. Conditions Apply, please see our Full Price Match Policy HERE
-
- Chat with one of our specialists and we will process your request live or submit a Price Match Request HERE
-
- Price Matching for Products You Have Already Purchased
-
- Please contact us HERE with our online submission or email us at info@mudify.com providing the lower price, the direct link to where you found it, and the date you purchased the item(s) from us. We will look into your order and process your refund. You will receive confirmation of the refund by email within 1-2 business days.
Shipping takes 2 to 3 days. If the order is placed before 3pm EST your item will ship out the same day, if not it will be shipped out the next day.
*Fast products have a Fast badge on the main image.
For Other Products
Shipping takes about 3 to 5 business days plus 24 to 48 hours of handling time. If you need expedited shipping please reach through the chat to give you a quote and time estimate.
Click here for our Full Warranty Policy
You can also check your order status on-line. Use the My Account button on top of every page or contact us at (786) 798-6597 or through our live chat.
For additional details, please read our complete Privacy Policy
Description
[DIFFERENTIAL CASE]
- A fully machined one-piece nodular iron differential carrier case offers the rigidity of a one-piece factory differential with twice the standard number of pinion gears to cope with the torque.
[FLANGE CAP ASSEMBLY]
- A fully machined nodular iron flange cap incorporates the stationary side of ARBs tough, proven, and patented timed locking mechanism.
[SPLINE SIDE GEAR]
- High-grade surface treatments, nickel alloy steel, and ARB’s patented timed locking system make this the most "lockable" gear in the industry.
[PINION GEAR]
- Forged gears and redefined tooth geometry, ARB's revolutionary design yields structural advantages of up to 30% over other available high-strength gears.
[TRACTION]
- Provides 100% traction on demand without affecting road drivability or driveline wear. Vastly improved traction means less reliance on momentum, thus reducing the likelihood of vehicle damage and environmental impact.
[RELIABLE]
- Incredibly simple yet effective design that employs minimal moving parts, thereby ensuring maximum reliability. Thoroughly tested and proven design trusted and used in over 80 countries around the world.
ABOUT THIS PRODUCT
Locking differentials have been available for years but were always a compromise, performing well either off the road or on the road - but not on both. The ARB Air Locker provides normal differential action on the street - maintaining safe, predictable handling. An ARB Air Locker differential will drive out of the most difficult situations. Easy-to-follow installation instructions are included in the kit.
Created to provide 100% traction on demand without sacrificing any of your vehicle's highway driving performance, ARB Air Lockers employ a 12 volt ARB Air Compressor designed to activate (and deactivate) a solid and durable locking mechanism inside the differential. This gives you the traction you need, when you need it, all at the flip of a switch and all within the comfort of the driver's seat.
SPECIFICATIONS
- Dimensions (L x W x H): 10.63 x 10.63 x 11.02 inches.
- Part Number: RD105.
- Weight: 22.00 lb.
- Shaft Diameter: 1.31".
- Spline Quantity: 30.
- Spline Type: 24/48 DP.
- Pressure Angle: 30 Degrees.
- Axle Model: Dana 35.
- Axle Position: Rear.
- Designed and manufactured in Australia.
- Fitment:
- 1990 - 2001 Jeep Cherokee (XJ).
- 1997 - 2006 Jeep Wrangler (TJ).
- 1990 - 1995 Jeep Wrangler (YJ).
Fitment
Returns & Warranty
Warranty
We pride ourselves with our partnerships and close relationships with our vendors, so in case your product fails after 30 days contact us and we will submit the warranty claim directly with the manufacturer.
Click here for our Full Warranty Policy
Returns
ll items are eligible for return within 30 days of the delivery date only if items are in its original packaging and in new (unused) condition.
Original & return shipping are non-refundable, but don't worry we will provide a discounted shipping label for your return so you do not pay full price ;)
We do not like to charge restocking fee BUT if the product or its box is not in perfect condition we can't sell it at full price again so we may charge you 15% restocking fee.
Click here to see our full return policy
FAQ
-
- Our prices can't be beat, and we're willing to put our money where our mouth is. If you find a lower price on a product and it's being sold by an authorized online retailer, we'll not only match it — we'll beat it. Conditions Apply, please see our Full Price Match Policy HERE
-
- Chat with one of our specialists and we will process your request live or submit a Price Match Request HERE
-
- Price Matching for Products You Have Already Purchased
-
- Please contact us HERE with our online submission or email us at info@mudify.com providing the lower price, the direct link to where you found it, and the date you purchased the item(s) from us. We will look into your order and process your refund. You will receive confirmation of the refund by email within 1-2 business days.
Shipping takes 2 to 3 days. If the order is placed before 3pm EST your item will ship out the same day, if not it will be shipped out the next day.
*Fast products have a Fast badge on the main image.
For Other Products
Shipping takes about 3 to 5 business days plus 24 to 48 hours of handling time. If you need expedited shipping please reach through the chat to give you a quote and time estimate.
Click here for our Full Warranty Policy
You can also check your order status on-line. Use the My Account button on top of every page or contact us at (786) 798-6597 or through our live chat.
For additional details, please read our complete Privacy Policy