ARB Universal Awning Bracket for Most Roof Racks OS850
$26.06
Starting at
/mo
with
i
45 day hassle free returns & exchanges
Manufacturer Warranty
The OS850 Awning bracket is designed with welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off road or under extreme conditions.
Zinc-plated and powder coated for corrosion resistance and designed to mount either upright or inverted, the awning bracket is 50 mm wide allowing it to fit over both Thule SquareBar & Rhino Heavy Duty bars in the inverted position, or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar & AeroBar or Rhino Heavy Duty.
Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning.
The awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer.
The current awning bracket has recently been upgraded from 3mm to 4mm construction however it is considered a lighter duty and designated for highway use.
Works on most roof racks, universal mount, round roof racks are a little harder to install
Listing is for one bracket, ARB suggest using 2 or 3 brackets to secure the Awning
Three slotted 6mm holes are provided to mount the awning, the OS850 awning bracket is not supplied with hardware
ARB suggests to use a Pair (2) or Three (3) units to securely mount the awning on the roof rack.
On Bigger Awnings like 2500x2500, or Smaller Awnings with Awning Room, is recommended to use Three (3) Awning Bracket Mounts
Zinc-plated and powder coated for corrosion resistance and designed to mount either upright or inverted, the awning bracket is 50 mm wide allowing it to fit over both Thule SquareBar & Rhino Heavy Duty bars in the inverted position, or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar & AeroBar or Rhino Heavy Duty.
Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning.
The awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer.
The current awning bracket has recently been upgraded from 3mm to 4mm construction however it is considered a lighter duty and designated for highway use.
Works on most roof racks, universal mount, round roof racks are a little harder to install
Listing is for one bracket, ARB suggest using 2 or 3 brackets to secure the Awning
Three slotted 6mm holes are provided to mount the awning, the OS850 awning bracket is not supplied with hardware
ARB suggests to use a Pair (2) or Three (3) units to securely mount the awning on the roof rack.
On Bigger Awnings like 2500x2500, or Smaller Awnings with Awning Room, is recommended to use Three (3) Awning Bracket Mounts
Need help or advice? - Talk to an expert!
Talk to an expert!
Call Now! (786) 699 - 8829
Front Shocks Assembly
Constant Load
Upper Control Arms (UCAs)
Rear Driveshaft Assembly
Front & Rear Constant Load
Lift Kit Height
Exclusive Father's Day Gift
Lift Kit Installation - Get a Free Quote
ARB Universal Awning Bracket for Most Roof Racks OS850
